| Citation: | SUN Xun-hai, TONG Jian-xing, YANG Xin-hui, LUO Peng-fei, DU Shi-wei. Application of micro-piles in reinforcment of soft soil area[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(z2): 91-94. DOI: 10.11779/CJGE2017S2023 |
| [1] |
JGJ123—2012既有建筑地基基础加固技术规范[S]. 北京: 中国建筑工业出版社, 2012. (JGJ123—2012 Technical code for improvement of soil and foundation of existing buildings[S]. Beijing: China Building Industry Press, 2012. (in Chinese))
|
| [2] |
JGJ94—2008建筑桩基技术规范[S]. 北京: 中国建筑工业出版社, 2008. (JGJ94—2008 Technical code for building pile foundations[S]. Beijing: China Building Industry Press, 2008. (in Chinese))
|
| [3] |
JGJ 79—2012建筑地基处理技术规范[S]. 北京: 中国建筑工业出版社, 2002. (JGJ 79—2012 Technical code for ground treatment of buildings[S]. Beijing: China Building Industry Press, 2012. (in Chinese))
|
| [4] |
GB 50007—2011建筑地基基础设计规范[S]. 北京: 中国建筑工业出版社, 2002. (GB 50007—2011 Code for design of building foundation[S]. Beijing: China Building Industry Press, 2011. (in Chinese))
|
| [5] |
GB 50300—2013建筑工程施工质量验收统一标准[S]. 北京: 中国建筑工业出版社, 2013. (GB 50300—2013 Unified standard for constructional quality acceptance of building engineering[S]. Beijing: China Building Industry Press, 2013. (in Chinese))
|
| [6] |
减沉复合桩基在软土地区的工程应用研究[J]. 建筑科学, 2016(增刊). (Engineering application research on composite pile foundation for reducing subsidence in soft soil area[J]. Building Science, 2016. (in Chinese))
|
| [1] | LI Guang-xin. Load and resistance in stability analysis of geotechnical engineering with safety factor method[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(5): 918-925. DOI: 10.11779/CJGE202105016 |
| [2] | SUN Chao-wei, CHAI Jun-rui, XU Zeng-guang, QIN Yuan, LI Gang. Stability charts for determining safety factors of 3D homogeneous slopes[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(11): 2068-2077. DOI: 10.11779/CJGE201811013 |
| [3] | JIANG Shui-hua<sup>1, 2</sup>, LI Dian-qing<sup>1, 2</sup>, ZHOU Chuang-bing<sup>1, 2</sup>. Non-intrusive stochastic finite element method for slope reliability analysis based on Latin hypercube sampling[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(zk2): 70-76. |
| [4] | LI Da-yong, GUO Yan-xue, GAO Yu-feng. Principle and application of pole point method of Mohr's circle[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(10): 1883-1888. |
| [5] | GUO Yang, KE Zhai-bang. Practical research on detecting cracks in pipe piles using stress wave method[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(sup2): 159-162. |
| [6] | MA Yongzheng, ZHENG Hong, ZHU Hehua, CAI Yongchang. Effect of cohesion on evaluating slope stability factor of safety by DDA method[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(7): 1088-1093. |
| [7] | CHEN Wei, WANG Junxing, XIN Liping, ZHANG Wei. Lower bound method of plastic limit analysis for wedge stability[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(3): 431-436. |
| [8] | LI Liang, CHI Shichun, LIN Gao. A new kind of complex method and its application to the search for the critical failure surface[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(4): 448-452. |
| [9] | ZHENG Hong, LI Chunguang, Lee C.F., GE Xiurun. Finite element method for solving the factor of safety[J]. Chinese Journal of Geotechnical Engineering, 2002, 24(5): 626-628. |
| [10] | YANG Mingcheng, ZHEN Yingren. Local minimum factor-of-safety method based on limit equilibrium theory[J]. Chinese Journal of Geotechnical Engineering, 2002, 24(5): 600-604. |