隧道掌子面裂隙轻量化智能识别及其几何量化方法

    Lightweight Intelligent Identification and Geometric Quantification Method for Tunnel Face Fractures

    • 摘要: 针对隧道掌子面裂隙识别计算开销较大、分割结果难以直接转化为几何参数的问题,提出一种由轻量化分割网络MDC-Net和层级化拓扑解析算法C-HTP组成的裂隙识别与几何量化方法。MDC-Net通过瓶颈投影与双重注意力机制增强细长裂隙表达和复杂背景抑制能力;C-HTP基于骨架拓扑和共线约束解析主裂隙与分支结构,提取裂隙的像素尺度长度、最大宽度和图像平面方向角。实验结果表明,MDC-Net参数量为1.831 M,计算量为2.520 GFLOPs,纯网络前向速度为245.57 FPS,mIoU和F1.5-Score分别达到82.83 %和82.27 %。人工标注掩码实验验证了C-HTP的独立量化能力,在MDC-Net预测掩码的端到端验证中,长度、最大宽度和图像平面方向角的MAE分别为17.65 pixel、1.26 pixel和5.22°。所提方法实现了从掌子面影像到像素尺度几何参数输出的连续处理,兼顾了裂隙分割精度、计算效率与几何量化能力。

       

      Abstract: To address the high computational cost of tunnel-face fracture identification and the difficulty in directly converting seg-mentation results into geometric parameters, a lightweight framework integrating the segmentation network MDC-Net and the hierarchical topology parsing algorithm C-HTP is proposed. MDC-Net employs bottleneck projection and a dual-attention mechanism to enhance the representation of elongated fractures and suppress interference from complex backgrounds. C-HTP uses skeleton topology and collinearity constraints to distinguish main fractures from branches and to extract pix-el-scale fracture length and maximum width, as well as image-plane orientation angle. Experimental results show that MDC-Net contains 1.831 M parameters, requires 2.520 GFLOPs, and achieves a network-only forward inference speed of 245.57 FPS, with mIoU and F1.5-Score reaching 82.83 % and 82.27 %, respectively. Experiments using manually annotated masks verify the standalone geometric quantification capability of C-HTP. In the end-to-end evaluation using MDC-Net-predicted masks, the mean absolute errors for fracture length, maximum width, and image-plane orientation angle are 17.65 pixels, 1.26 pixels, and 5.22°, respectively. The proposed framework enables an end-to-end workflow from tun-nel-face images to pixel-scale geometric parameters while balancing segmentation accuracy, computational efficiency, and geometric quantification capability.

       

    /

    返回文章
    返回