• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
LU Kun-lin, ZHU Da-yong, GAN Wen-ning, ZHOU Yu-xin. 3D limit equilibrium method for slope stability analysis and its application[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(12): 2276-2282.
Citation: LU Kun-lin, ZHU Da-yong, GAN Wen-ning, ZHOU Yu-xin. 3D limit equilibrium method for slope stability analysis and its application[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(12): 2276-2282.

3D limit equilibrium method for slope stability analysis and its application

More Information
  • Received Date: June 15, 2013
  • Published Date: November 30, 2013
  • By obtaining the normal stresses over slip surface and considering the equilibrium conditions of the whole sliding body, a three-dimensional slope stability analysis method is proposed, which satisfies four equilibrium conditions and accommodates to slip surfaces of any shape. The functions of inter-column force are assumed and the distribution function of the normal stress over slip surface containing three undetermined parameters is obtained based on the force equilibrium conditions of typical discretized column. Equilibrium equations are established considering the equilibrium conditions of the whole sliding body, and then 3D factor of safety is derived using the numerical and analytic methods. Some examples are given to verify the proposed method. The results show that the proposed method is more reliable compared with several other 3D slope stability analysis methods. Finally, this method has been successfully used in the stability analysis of slope on Jin Ping-zi Mountain. The present 3D slope stability analysis method can be widely used by geotechnical engineers in the design of slopes and treatment of landsides for its easy computing and programming.
  • [1]
    HOVLAND H J. Three-dimensional slope stability analysis method[J]. Journal of Geotechnical Engineering Division, 1977, 103(9): 971-986.
    [2]
    HUNGR O. An extension of Bishop's simplified method of slope stability analysis to three dimensions[J]. G#x000e9;otechnique, 1987, 37(1): 113-117.
    [3]
    HUNGR O, SALGADO F M, BYRNE P M. Evaluation of a three-dimensional method of slope stability analysis[J]. Canadian Geotechnical Journal, 1989, 26(4): 679-686.
    [4]
    冯树仁, 丰定祥, 葛修润, 等. 边坡稳定性的三维极限平衡分析方法及应用[J]. 岩土工程学报, 1999, 21(6): 657-661. (FENG Shu-ren, FENG Ding-xiang, GE Xiu-run, et al. 3D limit equilibrium method for slope stability and its application[J]. Chinese Journal of Geotechnical Engineering, 1999, 21(6): 657-661. (in Chinese))
    [5]
    ZHANG X. Three-dimensional stability analysis of concave slopes in plan view [J]. Journal of Geotechnical Engineering, 1988, 114(6): 658-671.
    [6]
    朱大勇, 钱七虎. 三维边坡严格与准严格极限平衡解答及工程应用[J]. 岩石力学与工程学报, 2007, 26(8): 1513-1528. (ZHU Da-yong, QIAN Qi-hu. Rigous and quasi-rigous limit equilibrium solutions of 3D slope stability and application to engineering[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(8): 1513-1528. (in Chinese))
    [7]
    郑 宏. 严格三维极限平衡法[J]. 岩石力学与工程学报, 2007, 26(8): 1529-1537. (ZHENG Hong. A rigorous three-dimensional limit equilibrium method [J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(8): 1529-1537. (in Chinese))
    [8]
    ZHENG H. Eigenvalue problem from the stability analysis of slopes[J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 2009, 135(5): 647-656.
    [9]
    ZHENG H. A three-dimensional rigorous method for stability analysis of landslides[J]. Engineering Geology, 2012, 145(9): 30-40.
    [10]
    卢坤林, 朱大勇. 基于滑面正应力修正的极限平衡法研究现状[J]. 工业建筑, 2012, 42(6): 131-136. (LU Kun-lin, ZHU Da-yong. The state of the art in limit equilibrium method by modifying normal stresses over slip surface[J]. Industrial Construction, 2012, 42(6): 131-136. (in Chinese))
    [11]
    朱大勇, 丁秀丽, 钱七虎. 一般形状边坡三维极限平衡解答[J]. 岩土工程学报, 2007, 29(10): 1460-1464. (ZHU Da-yong, DING Xiu-li, QIAN Qi-hu. Three-dimensional limit equilibrium solution to generalized-shaped slope stability[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(10): 1460-1464. (in Chinese))
    [12]
    李同录, 王艳霞, 邓宏科. 一种改进的三维边坡稳定性分析方法[J]. 岩土工程学报, 2003, 25(5): 611-614. (LI Tong-lu,WANG Yan-xia,DENG Hong-ke. An improved method for three-dimensional slope stability analysis[J]. Chinese Journal of Geotechnical Engineering, 2003, 25(5): 611-614. (in Chinese))
    [13]
    陈胜宏, 万 娜. 边坡稳定分析的三维剩余推力法[J]. 武汉大学学报: 工学版, 2005, 38(3): 69-73. (CHEN Sheng- hong, WAN Na. Study of three-dimensional residual thrust method for slope stability analysis[J]. Engineering Journal of Wuhan University, 2005, 38(3): 69-73. (in Chinese))
    [14]
    陈昌富, 朱剑锋. 基于 Morgenstern-Price 法边坡三维稳定性分析[J]. 岩石力学与工程学报, 2010, 29(7): 473-1480. (CHEN Chang-fu, ZHU Jian-feng. A three-dimensional slope stability analysis procedure based on Morgenstern-price method[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(7): 1473-1480. (in Chinese))
    [15]
    陈祖煜, 弥宏亮, 汪小刚. 边坡稳定三维分析的极限平衡方法[J]. 岩土工程学报, 2001, 23(5): 525-529. (CHEN Zu-yu, MI Hong-liang, WANG Xiao-gang. A three- dimensional limit equilibrium method for slope stability analysis[J]. Chinese Journal of Geotechnical Engineering, 2001, 23(5): 525-529. (in Chinese))
    [16]
    朱大勇, 丁秀丽, 刘华丽, 等. 对称边坡三维稳定性计算方法[J]. 岩石力学与工程学报, 2007, 26(1): 22-27. (ZHU Da-yong, DING Xiu-li, LIU Hua-li, et al. Method of three-dimensional stability analysis of a symmetrical slope[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(1): 22-27. (in Chinese))
    [17]
    袁 恒, 罗先启, 张振华. 边坡稳定分析三维极限平衡条柱间力的讨论[J]. 岩土力学, 2011, 32(8): 2453-2458. (YUAN Heng, LUO Xian-qi, ZHANG Zhen-hua. Discussion on force between columns of three-dimensional limit equilibrium for slope stability analysis[J]. Rock and Soil Mechanics, 2011, 32(8): 2453-2458. (in Chinese))
    [18]
    邓东平, 李 亮. 一般形状边坡下准严格与非严格三维极限平衡法[J]. 岩土工程学报, 2013, 35(3): 501-511. (DENG Dong-ping, LI Liang. Quasi-rigorous and non-rigorous 3D limit equilibrium methods for generalized-shaped slopes[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(3): 501-511. (in Chinese))
    [19]
    LAM L, FREDLUND D G. A general limit equilibrium model for three-dimensional slope stability analysis[J]. Canadian Geotechnical Journal, 1993, 30(6): 905-919.
    [20]
    HOEK E, BRAY J. Rock slope engineering [M]. Revised 2nd ed. London: The Institution of Mining and Metallurgy, 1977.
    [21]
    SL 386#x02014;2007 水利水电工程边坡设计规范[S]. 2007. (SL 386#x02014;2007 Design code for engineered slopes in water resources and hydropower projects[S]. 2007. (in Chinese))
  • Related Articles

    [1]ZHU Sheng, ZHONG Chun-xin, WANG Jing, HE Shun-bin. Experimental study on filling standard of high rockfill dams with soil core[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(3): 561-566. DOI: 10.11779/CJGE201903019
    [2]SUN Xiao-yu, QI Ji-lin, YIN Zhen-yu. Experimental study on compressibility of frozen saturated ISO standard sand[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(9): 1723-1728. DOI: 10.11779/CJGE201809020
    [3]QIN Zhen-hua. Stability standards of plate load tests on soft foundation[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(z2): 87-90. DOI: 10.11779/CJGE2017S2022
    [4]GU Xiao-qiang, YANG Jun, HUANG Mao-song, GAO Guang-yun. Combining bender element, resonant column and cyclic torsional shear tests to determine small strain shear modulus of sand[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(4): 740-746. DOI: 10.11779/CJGE201604020
    [5]MA Xian-feng, KONG Ling-gang, FANG Wei, GONG Bi-wei, LI Hao, XU Guang-ming, ZHAO Wei, ZHANG Xue-dong, CHEN Yun-min. Parallel tests on preparation of samples with sand pourer[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(10): 1791-1801. DOI: 10.11779/CJGE201410005
    [6]HOU Sheng-nan, LIU Shan-nan, CAI Zhong-xiang, HUANG Shao-ming. Test standards for lateral capacity of single PHC pile[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(zk1): 378-382.
    [7]DONG Quan-yang, CAI Yuan-qiang, XU Chang-jie, WANG Jun, SUN Hong-lei, GU Chuan. Measurement of small-strain shear modulus Gmax of dry and saturated sands by bender element and resonant column tests[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(12): 2283-2289.
    [8]BAI Li-dong, XIANG Wei, SAVIDIS A Stavros RACKWITZ Frank, SAVIDIS A Stavros RACKWITZ Frank. Resonant column and bender element tests on maximum shear modulus of dry sand[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(1): 184-188.
    [9]ZHAO Shougang, CHANG Xiangqian, PAN Shu. Reliability analysis of seepage stability on standard dyke of Yellow River[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(5): 684-689.
    [10]Shi Zhaoji, He Qizhi. On Problem of Standardization for Triaxial Liquefaction Tests[J]. Chinese Journal of Geotechnical Engineering, 1984, 6(1): 79-84.

Catalog

    Article views (476) PDF downloads (436) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return