• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
LI Jing-pei, LI Lin, SUN De-an, GONG Wei-bing. Time-dependent bearing capacity of jacked piles in K0 consolidated clay based on CPTU tests[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(2): 193-200. DOI: 10.11779/CJGE201702001
Citation: LI Jing-pei, LI Lin, SUN De-an, GONG Wei-bing. Time-dependent bearing capacity of jacked piles in K0 consolidated clay based on CPTU tests[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(2): 193-200. DOI: 10.11779/CJGE201702001

Time-dependent bearing capacity of jacked piles in K0 consolidated clay based on CPTU tests

More Information
  • Received Date: December 09, 2015
  • Published Date: March 24, 2017
  • Based on the SMP criterion-based K0 consolidated anisotropic Cam-clay model, an analytical solution to cylindrical cavity expansion for pile installation is derived. This solution incorporates the effects of the initial stress anisotropy, stress history and initial stress-induced anisotropy on the three-dimensional properties of K0 consolidated clay. According to the similarity of the stress state between the soil adjacent to pile shaft and the soil sample in simple shear tests, a theoretical approach to predict the time-dependent bearing capacity of jacked piles is proposed. This method is based on the axisymmetrical consolidation theory, and the parameters required in this method are only the cone tip resistance, cone base pore water pressure and the corresponding dissipation data from the CPTU sounding. This theoretical approach is verified by the centrifugal model tests, and the time-dependent bearing capacity of jacked piles is studied. The results show that the proposed theoretical method can properly predict the time-dependent bearing capacity of jacked piles, and can avoid the complicated test process of soil properties. The bearing capacity increases rapidly in short time after the pile installation and gradually tends to a stable value. The larger the pile diameter is, the slower the bearing capacity increases and the longer the required time for bearing capacity reaching stable value.
  • [1]
    CAI G J, LIU S Y, TONG L Y, et al. Assessment of direct CPT and CPTU methods for predicting the ultimate bearing capacity of single piles[J]. Engineering Geology, 2009, 104(1): 211-222.
    [2]
    ESLAMI A, FELLENIUS B H. Pile capacity by direct CPT and CPTU methods applied to 102 case histories[J]. Canadian Geotechnical Journal, 1997, 34(6): 886-904.
    [3]
    蔡国军, 刘松玉, 童立元, 等. 现代数字式多功能CPTU与中国CPT对比试验研究[J]. 岩石力学与工程学报, 2009, 28(5): 914-928. (CAI Guo-jun, LIU Song-yu, TONG Li-yuan, et al. Comparative study of modern digital multifunctional CPTU and China's CPT test[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(5): 914-928. (in Chinese))
    [4]
    DOHERT Y P, GAVIN K. The shaft capacity of displacement piles in clay: a state of the art review[J]. Geotechnical and Geological Engineering, 2011, 29(4): 389-410.
    [5]
    DE R J, BERINGEN F L. Pile foundations for large North Sea structures[J]. Marine Geotechnology, 1979, 3(3): 267-314.
    [6]
    ALSAMMAN O M. The use of CPT for calculating axial capacity of drilled shafts[D]. Urbana: University of Illinois at Urbana-Champaign, 1995.
    [7]
    蔡国军, 刘松玉. 基于CPTU 测试的桩基承载力预测新方法[J]. 岩土工程学报, 2010, 32(增刊2): 479-482. (CAI Guo-jun, LIU Song-yu. New method based on CPTU data to evaluate pile bearing capacity[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(S2): 479-482. (in Chinese))
    [8]
    蔡国军, 刘松玉, ANAND J P, 等. 基于CPTU 测试的桩基承载力可靠性分析[J]. 岩土工程学报, 2011, 33(3): 404-412. (CAI Guo-jun, LIU Song-yu, ANAND J P, et al. Reliability assessment of bearing capacity of pile foundation based on CPTU data[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(3): 404-412. (in Chinese))
    [9]
    俞 峰, 杨 峻. 砂土中钢管桩承载力的静力触探设计方法[J]. 岩土工程学报, 2011, 33(增刊2): 349-354. (YU Feng, YANG Jun. Design methods for bearing capacity of steel pipe piles driven in sand by means of cone penetration tests[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(S2): 349-354. (in Chinese))
    [10]
    曹 权, 施建勇, 雷国辉, 等. 基于波速孔压静力触探试验计算软土中静压桩的单桩极限承载力[J]. 岩土工程学报, 2012, 34(1): 51-57. (CAO Quan, SHI Jian-yong, LEI Guo-hui, et al. Calculation of ultimate bearing capacity of jacked-in piles in soft soil based on seismic piezocone penetration tests[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(1): 51-57. (in Chinese))
    [11]
    曹 权, 施建勇, 雷国辉, 等. 基于波速孔压静力触探试验研究软土中单桩桩侧承载力时效性[J].岩石力学与工程学报, 2011, 30(7): 1482-1487. (CAO Quan, SHI Jian-yong, LEI Guo-hui, et al. Research on time-effect of shaft bearing capacity of jacked-in single pile in soft soil based on seismic piezocone penetration tests (SCPTU)[J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(7): 1482-1487. (in Chinese))
    [12]
    YAO Y P, HOU W, ZHOU A N. UH model: three- dimensional unified hardening model for overconsolidated clays[J]. Géotechnique, 2009, 59(5): 451-469.
    [13]
    YAO Y P, ZHOU A N. Non-isothermal unified hardening model: a thermo-elasto-plastic model for clays[J]. Géotechnique, 2013, 63(15): 1328-1345.
    [14]
    YAO Y P, WANG N D. Transformed stress method for generalizing soil constitutive models[J]. Journal of Engineering Mechanics, 2014, 140(3): 614-629.
    [15]
    王乃东, 姚仰平. 基于变换应力方法的各向异性模型三维化[J]. 岩土工程学报, 2011, 33(1): 50-56. (WANG Nai-dong, YAO Yang-ping. Generalization of anisotropic constitutive models using transformed stress method[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(1): 50-56. (in Chinese))
    [16]
    SUN D A, MATSUOKA H, YAO Y P. An anisotropic hardening elastoplastic model for clays and sands and its application to FE analysis[J]. Computers and Geotechnics, 2004, 31(1): 37-46.
    [17]
    MATSUOKA H, SUN D A. The SMP Concept-based 3D constitutive models for geomaterials[M]. London: Taylor & Francis, 2006.
    [18]
    YU H S. Cavity expansion methods in geomechanics[M]. Dordrecht: Kluwer Academic Publishers, 2000.
    [19]
    CHANG M F, CAO L F, TEH C I. Undrained cavity expansion in modified Cam clay. II: Application to the interpretation of cone penetration tests[J]. Géotechnique, 2001, 51(4): 331-346.
    [20]
    CAO L F, TEH C I, CHANG M F. Undrained cavity expansion in modified Cam clay I: theoretical analysis[J]. Géotechnique, 2001, 51(4): 323-34.
    [21]
    侯 伟, 姚仰平, 崔文杰. K 0 超固结土的不排水抗剪强度[J]. 力学学报, 2008, 40(6): 795-803. (HOU Wei, YAO Yang-ping, CUI Wen-jie. Undrained shear strength for K 0 overconsolidated clays[J]. Chinese Journal of Theoretical and Applied Mechanics, 2008, 40(6): 795-803. (in Chinese))
    [22]
    RANDOLPH M F. Science and empiricism in pile foundation design[J]. Géotechnique, 2003, 53(10): 847-875.
    [23]
    姚仰平. UH 模型系列研究[J]. 岩土工程学报, 2015, 37(2): 193-217. (YAO Yang-ping. Advanced UH models for soils[J].Chinese Journal of Geotechnical Engineering, 2015, 37(2): 193-217. (in Chinese))
    [24]
    GUO W D. Visco-elastic consolidation subsequent to pile installation[J]. Computers and Geotechnics, 2000, 26(2): 113-144.
    [25]
    RANDOLPH M F, WROTH C P. Application of the failure state in undrained simple shear to the shaft capacity of driven piles[J]. Géotechnique, 1981, 31(1): 143-157.
    [26]
    李镜培, 李 林, 孙德安, 等. 饱和软土地层静压沉桩阻力理论研究[J]. 岩土工程学报, 2015, 31(8): 1454-1461. (LI Jing-pei, LI Lin, SUN De-an, et al. Theoretical study on sinking resistance of jacked piles in saturated soft clay[J]. Chinese Journal of Geotechnical Engineering, 2015, 31(8): 1454-1461. (in Chinese))
    [27]
    MEYERHOF G G. Bearing capacity and settlement of pile foundations[J]. Journal of Geotechnical and Geoenvironmental Engineering, 1976, 102(3): 197-228.
    [28]
    MAYNE P W, KULHAWY F H. K 0 -OCR relationships in soils[J]. Journal of Geotechnical Engineering, 1982, 108(6): 851-872.
    [29]
    JGJ 106—2014 建筑基桩检测技术规范[S]. 2014. (JGJ 106—2014 Technical code for testing of building foundation piles[S]. 2014. (in Chinese))

Catalog

    Article views (443) PDF downloads (511) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return