| Citation: | LI Ya-di, LI Jia-jin, CHEN Ding-ding, FAN Ren-xiang, SANG Guo-long, NI Jian-ming, DING Yun-sheng. Properties of nanosilica-reinforced polyurethane by in-situ preparation and its application in polyurethane grouting[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(zk1): 83-86. DOI: 10.11779/CJGE2016S1015 |
| [1] |
Naudts. Irreversible changes in the grouting industry caused by polyurethane grouting[C]// An Overview of 30 years of polyurethane Grouting. Grouting and ground Treatment- Proceedings of 3rd International specialty Conference on Grouting and Treatment, 2003.
|
| [2] |
XIANG X J, QIAN J W, YANG W Y, et al. Synthesis and properties of nanosilica-reinforced polyurethane for grouting[J]. Journal of Applied Polymer Science, 2006, 100: 4333-4337.
|
| [3] |
PHUA S L, YANG Li-ping, TOH C L, et al. Reinforcement of polyether polyurethane with dopamine-modified clay: the role of interfacial hydrogen bonding[J]. Appl Mater Interfaces, 2012(4): 4571-4578.
|
| [4] |
ZHANG Li-hui, ZHANG Hong, GUO Jin-shan. Synthesis and properties of uv-curable polyester-based waterborne polyurethane/functionalized silica composites and morphology of their nanostructured films[J]. Industrial & Engineering Chemistry Research, 2012, 51: 8434-8441.
|
| [5] |
朱 锦, 李雅迪, 孙晓红, 等.以TDI为扩链剂合成亲水性聚氨酯注浆堵水材料研究[J]. 中国建筑防水, 2014, 12: 23-26. (ZHU Jin, LI Ya-di, SUN Xiao-hong, et al. Study on synthesis of hydrophilic polyurethane grouting and water-blocking material with TDI as chain extender[J]. China Building Waterproofing, 2014, 12: 23-26. (in Chinese))
|
| [1] | LI Guang-xin. Load and resistance in stability analysis of geotechnical engineering with safety factor method[J]. Chinese Journal of Geotechnical Engineering, 2021, 43(5): 918-925. DOI: 10.11779/CJGE202105016 |
| [2] | SUN Chao-wei, CHAI Jun-rui, XU Zeng-guang, QIN Yuan, LI Gang. Stability charts for determining safety factors of 3D homogeneous slopes[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(11): 2068-2077. DOI: 10.11779/CJGE201811013 |
| [3] | JIANG Shui-hua<sup>1, 2</sup>, LI Dian-qing<sup>1, 2</sup>, ZHOU Chuang-bing<sup>1, 2</sup>. Non-intrusive stochastic finite element method for slope reliability analysis based on Latin hypercube sampling[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(zk2): 70-76. |
| [4] | LI Da-yong, GUO Yan-xue, GAO Yu-feng. Principle and application of pole point method of Mohr's circle[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(10): 1883-1888. |
| [5] | GUO Yang, KE Zhai-bang. Practical research on detecting cracks in pipe piles using stress wave method[J]. Chinese Journal of Geotechnical Engineering, 2011, 33(sup2): 159-162. |
| [6] | MA Yongzheng, ZHENG Hong, ZHU Hehua, CAI Yongchang. Effect of cohesion on evaluating slope stability factor of safety by DDA method[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(7): 1088-1093. |
| [7] | CHEN Wei, WANG Junxing, XIN Liping, ZHANG Wei. Lower bound method of plastic limit analysis for wedge stability[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(3): 431-436. |
| [8] | LI Liang, CHI Shichun, LIN Gao. A new kind of complex method and its application to the search for the critical failure surface[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(4): 448-452. |
| [9] | ZHENG Hong, LI Chunguang, Lee C.F., GE Xiurun. Finite element method for solving the factor of safety[J]. Chinese Journal of Geotechnical Engineering, 2002, 24(5): 626-628. |
| [10] | YANG Mingcheng, ZHEN Yingren. Local minimum factor-of-safety method based on limit equilibrium theory[J]. Chinese Journal of Geotechnical Engineering, 2002, 24(5): 600-604. |