Citation: | LIU Shao-feng, SU Yong-hua, LI Shuai. Calculation of safety factor of tunnel structure based on Duncan-Fama convergence curve[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(7): 1307-1315. DOI: 10.11779/CJGE201607019 |
[1] |
李利平, 李术才, 赵 勇, 等. 超大断面隧道软弱破碎围岩渐进破坏过程三维地质力学模型试验研究[J]. 岩石力学与工程学报, 2012, 31(3): 550-560. (LI Li-ping, LI Shu-cai, ZHAO Yong, et al. 3D geomechanical model for progressive failure progress of weak broken surrounding rock in super large section tunnel[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(3): 550-560. (in Chinese))
|
[2] |
文竞舟, 张永兴, 王 成, 等. 钢拱架应力反分析隧道初期支护力学性能的研究[J]. 土木工程学报, 2012, 45(2): 170-175. (WEN Jing-zhou, ZHANG Yong-cheng, WANG Cheng, et al. Back analysis for the mechanical properties of initial tunnel support based on steel arch stresses[J]. China Civil Engineering Journal, 2012, 45(2): 170-175. (in Chinese))
|
[3] |
苏永华, 何满朝, 高 谦. Rosenblueth 方法在软破围岩锚喷支护系统评价中的应用[J]. 岩土工程学报, 2004, 26(3): 378-382. (SU Yong-hua, HE Man-chao, GAO Qian. Application of Rosenblueth method in evaluating stability reliability of anchor-shotcrete net support system for soft-fracture surrounding rock[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(3): 378-382. (in Chinese))
|
[4] |
JTG D70—2004公路隧道设计规范[S]. 2004. (JTG D70—2004 Code for design of road tunnel[S]. 2004. (in Chinese))
|
[5] |
TB10003—2005铁路隧道设计规范[S]. 2005. (TB10003—2005 Code for design on tunnel of railway[S]. 2005. (in Chinese))
|
[6] |
S1279—2002水工隧洞设计规范[S]. 2002. (S1270—2002 Specification for design of hydraulic tunnel[S]. 2002. (in Chinese))
|
[7] |
GB 50086—2001锚杆喷射混凝土支护技术规范[S]. 2001. (GB 50086—2001 Specifications for bolt-shotcrete support[S]. 2001. (in Chinese))
|
[8] |
苏永华, 何新亮, 罗正东. 基于强度折减法的隧道围岩稳定性研究[J]. 水文地质工程地质, 2014, 41(1): 48-53. (SU Yong-hua, HE Xin-liang, LUO Zheng-dong, Research on the stability of surrounding rocks based on the strength reduction method[J]. Hydrogeology & Engineering Geology, 2014, 41(1): 48-53. (in Chinese))
|
[9] |
苏永华, 刘少峰, 王凯旋, 等. 基于收敛-约束原理的地下结构稳定性分析[J]. 岩土工程学报, 2014, 36(11): 2002-2009. (SU Yong-hua, LIU Shao-feng, WANG Kai-xuan, et al, Stability analysis of underground structures based on convergence-confinement method[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(11): 2002-2009. (in Chinese))
|
[10] |
来弘鹏, 林永贵, 谢永利, 等. 支护时机对软弱围岩公路隧道力学特征影响的试验研究[J]. 岩土工程学报, 2009, 31(3): 390-395. (LAI Hong-peng, LIN Yong-gui, XIE Yong-li, et al. Influence of supporting opportunity on stress characteristics of soft-weak surrounding rocks in highway tunnels[J]. Chinese Journal of Geotechnical Engineering, 2009, 31(3): 390-395. (in Chinese))
|
[11] |
DUNCAN Fama M E. Numerical modelling of yield zones in weakrock. Comprehensive Rock Engineering[M]. Oxford: Pergamon Press, 1993.
|
[12] |
HOEK E. The Hoek-Brown failure criterion-a 1988 update[C]// Proc 15th Canadian Rock Mech Symp Toronto. Toronto, 1988: 31-38.
|
[13] |
CARRANZA-TORRES C, FAIRHURST C. The elasto- plastic response of underground excavations in rock masses that satisfy the Hoek-Brown failure criterion[J]. International Journal of Rock Mechanics and Mining Sciences, 1999, 36(6): 777-809.
|
[14] |
李世辉. 隧道支护设计新论: 典型类比分析法应用和理论[M]. 北京: 科学出版社, 1999. (LI Shi-hui. A new concept of tunnel support design-application and theory of precedent type analysis[M]. Beijing: Science Press, 1999. (in Chinese))
|
[15] |
RABCEWICZ L V, GOLSER J. Principles of dimensioning the supporting system for the “New Austrian Tunnelling Method”[J]. Water Power, 1973, 3: 88-93.
|
[16] |
朱浮声. 锚喷加固设计方法[M]. 北京: 冶金工业出版社, 1993. (ZHU Fu-sheng, Design method of anchor-shotcrete reinforcement[M]. Beijing: Metallurgical Industry Press, 1993. (in Chinese))
|
[17] |
ORESTE P P. Analysis of structural interaction in tunnels using the convergence-confinement approach[J]. Tunnelling and Underground Space Technology, 2003, 18(4): 347-363.
|
[18] |
CARRANZA-TORRES C, FAIRHURST C. Application of the convergence-confinement method of tunnel design to rock masses that satisfy the Hoek-Brown failure criterion [J]. Tunnelling and Underground Space Technology, 2000, 15(2): 187-213.
|