Advanced Search
  • 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引（EI）收录期刊
  • Scopus数据库收录期刊
Volume 36 Issue 5
Turn off MathJax
Article Contents
Abstract
References
Related Articles
TANG Zhi-cheng, LIU Quan-sheng, LIU Xiao-yan. Shear behavior of rock joints and comparative study on shear strength criteria with three-dimensional morphology parameters[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(5): 873-879. DOI: 10.11779/CJGE201405009
Citation: TANG Zhi-cheng, LIU Quan-sheng, LIU Xiao-yan. Shear behavior of rock joints and comparative study on shear strength criteria with three-dimensional morphology parameters[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(5): 873-879. DOI: 10.11779/CJGE201405009
shu

Shear behavior of rock joints and comparative study on shear strength criteria with three-dimensional morphology parameters

  • 1. School of Civil & Architectural Engineering, Wuhan University, Wuhan 430072, China; 2. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China

More Information
  • Received Date: September 15, 2013
  • Published Date: May 20, 2014
    Graphical Abstract
    • Abstract
  • Three groups of rock joints with different morphologies are made from cement mortar materials. The shear behavior is investigated by means of the direct shear tests under constant normal stress condition. The effects of the applied normal stress and morphology on the shear strength are analyzed. According to the experimental results, it can be found that the peak dilatancy angle decreases with the increasing normal stress and increases with the increasing roughness. The shear strength increases with the increasing normal stress and also the roughness of rock joints. The reason of underestimation by JRC-JCS criterion is analyzed, and it is suggested to adopt the three-dimensional morphology parameters and tensile strength to capture the characteristics of the peak shear strength. The hyperbolic criterion is suggested to use as a predictive tool to assess the peak shear strength of rock joints under low normal stress level based on the comparisons among several criteria with three-dimensional morphology parameters.
    • FullText(HTML)
    • References (33)
  • [1]
    PATTON F D. Multiple modes of shear failure in rock[C]// Proceedings of the First Congress of International Society of Rock Mechanics. Lisbon, 1966: 509-513.
    [2]
    LADANYI B,ARCHAMBAULT G. Simulation of the shear behavior of a jointed rock mass[C]// Proceedings of the 11th US Symposium on Rock Mechanics. Berkeley, 1970: 105-125.
    [3]
    BARTON N. Review of a new shear strength criterion for rock joints[J]. Engineering Geology, 1973, 7(2): 287-332.
    [4]
    SCHNEIDER H J. The friction and deformation behavior of rock joints[J]. Rock Mechanics, 1976, 8(3): 169-185.
    [5]
    BARTON N, CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics and Rock Engineering, 1977, 10(1/2): 1-54.
    [6]
    PLESHA M E. Constitutive models for rock discontinuities with dilatancy and surface degradation[J]. International Journal for Numerical and Analytical Method in Geomechanics, 1987, 11(4): 345-362.
    [7]
    JING L. Numerical modeling of jointed rock masses by distinct element method for two,and three dimensional problems[D]. Lulea: Lulea University of Technology, 1990.
    [8]
    MAKSIMOVIC M. New description of shear strength for rock joints[J]. Rock Mechanics and Rock Engineering, 1992, 25(4): 275-284.
    [9]
    KULATILAKE P, SHOU G, HUANG T H, et al. New peak shear strength criteria for anisotropic rock joints[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts, 1995, 32(7): 673-697.
    [10]
    KULATILAKE P, SHOU G, HUANG TH. Spectral-based peak-shear-strength criterion for rock joints[J]. ASCE Journal of Geotechnical Engineering, 1995, 121(11): 789-796.
    [11]
    KULATILAKE P, UM J, PANDA B B, et al. Development of new peak shear-strength criterion for anisotropic rock joints[J]. ASCE Journal of Engineering Mechanics, 1999, 125(9): 1010-1017.
    [12]
    ZHAO J. Joint surface matching and shear strength part B：JRC-JMC shear strength criterion[J]. International Journal of Rock Mechanics and Mining Science, 1997, 34(2): 179-185.
    [13]
    赵 坚. 岩石节理剪切强度的JRC-JMC新模型[J]. 岩石力学与工程学报, 1998, 17(4): 349-357. (ZHAO Jian. A new shear strength criterion for rock joint[J]. Chinese Journal of Rock Mechanics and Engineering, 1998, 17(4): 349-357. (in Chinese))
    [14]
    AMADEI B,WIBOWO J,STURE S,et al. Applicability of existing models to predict the behavior of replicas of natural fractures of welded tuff under different boundary conditions[J]. Geotechnical and Geology Engineering, 1998, 16(1): 79-128.
    [15]
    GRASSELLI G, EGGER P. Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters[J]. International Journal of Rock Mechanics and Mining Sciences, 2003, 40(1): 25-40.
    [16]
    GRASSELLI G. Manuel Rocha medal recipient-Shear strength of rock joints based on quantified surface description[J]. Rock Mechanics and Rock Engineering, 2006, 39(4): 295-314.
    [17]
    XIA C C, TANG Z C, XIAO W M, et al. New peak shear strength criterion based on quantified surface description[J]. Rock Mechanics and Rock Engineering (in press)
    [18]
    BEER A J, STEAD D, COGGAN J S. Estimation of the joint roughness coefficient (JRC) by visual comparison[J]. Rock Mechanics and Rock Engineering, 2014, 47(2): 387-400.
    [19]
    HONG E S, LEE J S, LEE I M. Underestimation of roughness in rough rock joints[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2008, 32(11): 1385-1403.
    [20]
    TSE R, CRUDEN D M. Estimating joint roughness coefficients[J]. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstract, 1979, 16(5): 303-307.
    [21]
    XIE H, PARISEAU WG. Fractal estimation of the joint roughness coefficients[C]// Proceedings of International Conference on Fractured and Jointed Rock Masses. Rotterdam, Balkema: 1992: 125-131.
    [22]
    ZHAO J. Joint surface matching and shear strength part A: Joint matching coefficient (JMC)[J]. International Journal of Rock Mechanics and Mining Science, 1997, 34(2): 173-178.
    [23]
    GHAZVINIAN A H, AZINFAR M J, GERANMAYEH R. Importance of tensile strength on the shear behavior of discontinuities[J]. Rock Mechanics and Rock Engineering, 2012, 45(3): 349-359.
    [24]
    GRASSELLI G, WIRTH J, EGGER P. Quantitative three-dimensional description of a rough surface and parameter evolution with shearing[J]. International Journal of Rock Mechanics and Mining Sciences, 2002, 39(6): 789-800.
    [25]
    YANG Z Y, TAGHICHIAN A, HUANG G D. On the applicability of self-affinity concept in scale of three-dimensional rock joints[J]. International Journal of Rock Mechanics and Mining Science, 2011, 48(7): 1173-1187.
    [26]
    唐志成. 考虑扰动影响的节理与柱状节理岩体的力学性质[D]. 上海: 同济大学, 2013. (TANG Zhi-cheng. Mechanical behaviors of rock joint under different contact state and columnar jointed rock mass[D]. Shanghai: Tongji University, 2013. (in Chinese))
    [27]
    夏才初, 王 伟, 丁增志. TJXW-3D型便携式岩石三维表面形貌仪的研制[J]. 岩石力学与工程学报, 2008, 27(7): 1505-1512. (XIA Cai-chu, WANG Wei, DING Zeng-zhi. Development of three-dimensional TJXW-3D-typed portable rock surface topography[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(7): 1505-1512. (in Chinese)).
    [28]
    TATONE B S A, GRASSELLI G. A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials[J]. The Review of Scientific Instruments, 2009, 80(2): paper 125110.
    [29]
    PARK J W, SONG J J. Numerical simulation of a direct shear test on a rock joint using a bonded-particle model[J]. International Journal of Rock Mechanics and Mining Scienc, 2009, 46(8): 1315-1328.
    [30]
    BAHAADDINI M, SHARROCK G, HEBBLEWHITE B K. Numerical direct shear tests to model the shear behavior of rock joints[J]. Computers and Geotechnics, 2013, 51(1): 101-115.
    [31]
    BARTON N. Rock mechanics review - The shear strength of rock and rock joints[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts, 1976, 13(9): 255-279.
    [32]
    KVELDSVIK V, NILSEN B, EINSTEIN H H, et al. Alternative approaches for analyses of a 100,000 m3 rock slide based on Barton-Bandis shear strength criterion[J]. Landslides, 2008, 5(2): 161-176.
    [33]
    KIM D H, GRATCHEV I, BALASUBRAMANIAM A. Determination of joint roughness coefficient (JRC) for slope stability analysis: A case study from the Gold Coast area, Australia[J]. Landslides, 2013, 10(5): 657-664.
    • Related Articles

  • Related Articles

    [1]JI En-yue, CHEN Sheng-shui, ZHU Jun-gao, FU Zhong-zhi. Experimental research on tensile strength of gravelly soil under different gravel contents[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(7): 1339-1344. DOI: 10.11779/CJGE201907019
    [2]DENG Hua-feng, XIAO Yao, LI Jian-lin, DUAN Ling-ling, ZHI Yong-yan, PAN Deng. Degradation laws of joint strength and micro-morphology under repeated shear tests[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(S2): 183-188. DOI: 10.11779/CJGE2018S2037
    [3]TANG Zhi-cheng, LIU Quan-sheng. Shear strength criterion and shear components of rock joints I: Shear strength criterion[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(2): 292-298. DOI: 10.11779/CJGE201502012
    [4]SUN Fu-ting, SHE Cheng-xue, WAN Li-tai, JIANG Qing-ren. Peak shear strength criterion for rock joints based on three-dimensional morphology characteristics[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(3): 529-536. DOI: 10.11779/CJGE201403016
    [5]LIU Yun-si, FU He-lin, RAO Jun-ying, DONG Hui, ZHANG Hai-ming. Tensile strength of slate based on Heok-Brown criterion[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(6): 1172-1177.
    [6]TANG Zhi-cheng, XIA Cai-chu, SONG Ying-long. New peak shear strength criteria for roughness joints[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(3): 571-577.
    [7]TANG Zhi-cheng. Modified Jennings shear strength criterion based on mechanical weakening model of rock bridges[J]. Chinese Journal of Geotechnical Engineering, 2012, 34(11): 2093-2099.
    [8]XU Weiya, ZHANG Guike. Study on orthotropic equivalent strength parameters of jointed rock mass[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(6): 806-810.
    [9]WU Jiwen, JIANG Zhenquan, FAN Cheng, LIN Feng. Study on tensile strength of coal seam by wave velocity[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(9): 999-1003.
    [10]Peng Wanwei. Tensile strength of frozen loess varying with strain rate and temperature[J]. Chinese Journal of Geotechnical Engineering, 1998, 20(3): 31-33.
    • Supplements (0)

Catalog

    Get Citation
    PDF
    XML
    Article views (427) PDF downloads (324) Cited by()
    Related
    Copyright © 2010 Editorial By Chinese Journal of Geotechnical Engineering 苏ICP备05007122号-11公安联网备案号：32010602011255
    Editorial Office address：34 Hujuguan,Nanjing 210024,ChinaPostal Code：210024Tel：025-85829534，85829556E-mail: ge@nhri.cn

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return