• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊
  • Scopus数据库收录期刊
叶云雪, 邹维列, 韩仲, 刘小文. 非饱和土孔隙比与基质吸力关系的通用模型[J]. 岩土工程学报, 2019, 41(5): 927-933. DOI: 10.11779/CJGE201905016
引用本文: 叶云雪, 邹维列, 韩仲, 刘小文. 非饱和土孔隙比与基质吸力关系的通用模型[J]. 岩土工程学报, 2019, 41(5): 927-933. DOI: 10.11779/CJGE201905016
YE Yun-xue, ZOU Wei-lie, HAN Zhong, LIU Xiao-wen. General model for relationship between void ratio and matric suction in unsaturated soils[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(5): 927-933. DOI: 10.11779/CJGE201905016
Citation: YE Yun-xue, ZOU Wei-lie, HAN Zhong, LIU Xiao-wen. General model for relationship between void ratio and matric suction in unsaturated soils[J]. Chinese Journal of Geotechnical Engineering, 2019, 41(5): 927-933. DOI: 10.11779/CJGE201905016

非饱和土孔隙比与基质吸力关系的通用模型

General model for relationship between void ratio and matric suction in unsaturated soils

  • 摘要: 基于土的土-水特征曲线(SWCC)和收缩特征曲线(SSCC)的特点及二者之间的联系,采用三直线的分段SSCC模型及非饱和土的三相比例公式,推导出了反映非饱和土孔隙比与基质吸力关系的通用模型。为了证实所提出模型的可靠性,采用GDS三轴仪进行了一系列吸力平衡试验,并对所提出模型的理论假设进行了验证。试验结果表明:利用该假设并通过吸力平衡下试样的排水量,可以准确地预测饱和试样在某一基质吸力和净围压共同作用下的体积变化量、进气量和总体变,证明了所提出模型的假设是成立的,且假设中的系数u具有明确的物理意义。

     

    Abstract: A general model is proposed to simulate the dependence of void ratio on matric suction for unsaturated soils. This model can be derived based on (i) the characteristics and the relationship between soil-water characteristic curve (SWCC) and soil shrinkage characteristic curve (SSCC) and (ii) a SSCC formula using a three-segment linear model, and a three-phase basic formula for unsaturated soils. A series of unsaturated tests are conducted by using the triaxial apparatus on a red clay to further verify the theoretical assumption required for the proposed model. Only one parameter u is required in the theoretical assumption and has a clear physical meaning, which can be calibrated using the conventional SWCC tests. Based on the assumption with the amount of drainage of saturated samples at a given suction, the bulk volume change, the amount of the air entry into the soil and the total volumetric strain can be accurately predicted. The validity and application of the assumption are demonstrated by these tests, and hence the proposed assumption-based model is also validated.

     

/

返回文章
返回