高级搜索
  • 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引（EI）收录期刊
  • Scopus数据库收录期刊

节理岩体表征单元体尺寸确定的数值模拟

朱万成, 张敏思, 张洪训, 郭孝庆, 关凯

朱万成, 张敏思, 张洪训, 郭孝庆, 关凯. 节理岩体表征单元体尺寸确定的数值模拟[J]. 岩土工程学报, 2013, 35(6): 1121-1127.
引用本文: 朱万成, 张敏思, 张洪训, 郭孝庆, 关凯. 节理岩体表征单元体尺寸确定的数值模拟[J]. 岩土工程学报, 2013, 35(6): 1121-1127.
shu
ZHU Wan-cheng, ZHANG Min-si, ZHANG Hong-xun, GUO Xiao-qing, GUAN Kai. Numerical simulation for determining the size of representative element volume (REV) of jointed rock mass[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(6): 1121-1127.
Citation: ZHU Wan-cheng, ZHANG Min-si, ZHANG Hong-xun, GUO Xiao-qing, GUAN Kai. Numerical simulation for determining the size of representative element volume (REV) of jointed rock mass[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(6): 1121-1127.
shu

节理岩体表征单元体尺寸确定的数值模拟  English Version

  • 东北大学资源与土木工程学院，辽宁 沈阳 110819

基金项目: 国家自然科学基金项目（51222401，50934006）；中央高校基本科研业务费项目（N110201001，N120101001）；科技部中国-南非联合研究计划项目（CS06-L01/2012DFG71060）
详细信息
    作者简介:

    朱万成(1974- )，教授，博士生导师，主要从事岩石力学方面的教学与科研工作。E-mail: zhuwancheng@mail.neu.edu.cn。

  • 中图分类号: TU458

Numerical simulation for determining the size of representative element volume (REV) of jointed rock mass

  • School of Resource & Civil Engineering, Northeastern University, Shenyang 110819, China

摘要

    摘要
  • 摘要: 从节理岩体表征单元体的力学意义出发，在通过对某物理试验结果进行模拟以验证RFPA程序模拟节理岩体强度及破裂模式具有适用性的基础上，提出一种基于RFPA数值模拟确定节理岩体表征单元体的方法。该方法基于蒙特卡洛法生成二维节理裂隙网格，实现节理裂隙的表征，将其导入岩石破裂过程分析软件中，分析节理岩体弹性模量和单轴抗压、抗拉强度的尺寸效应和各向异性，并据此确定了节理岩体的表征单元体尺寸。最后，针对某采场围岩节理面统计参数，分析讨论节理岩体的尺寸效应和各向异性，通过综合分析确定了节理岩体的弹性模量、抗压强度和抗拉强度等参数，并得出其表征单元体的尺度为6 m×6 m，这为后续的岩石力学研究奠定基础。
    Abstract: According to the physical and mechanical significance of the representative element volume (REV) of jointed rock mass, based on the validation of rock failure process analysis (RFPA) software by simulating the strength and failure mode of the jointed rock mass synthesized in laboratory, a RFPA-based approach for determining the REV of the jointed rockmass is proposed. In this approach, a two-dimensional joint network is generated is represented based on the Monte-Carlo simulation of joint network. And then, the joint data are imported into the RFPA in order to study the size effect and anisotropy of the elastic moduli, the compressive strength and the tensile strength of the jointed rockmass, based on which the REV size is determined. At last, aiming at the jointed rock mass around a tunnel at a certain underground metal mine, the size effect and the anisotropy of the parameters of jointed rock mass are numerically examined. The REV size of the jointed rock mass is estimated to be 6 m×6 m after the comprehensive numerical analysis on the elastic moduli, compressive strength and tensile strength of the jointed rock at different spatial scales and orientations of joint, which may lay the basis for further geomechanical study analysis on jointed rock mass.
    • HTML全文
    • 参考文献(18)
  • [1] BEAR J. Dynamics of fluids in porous media[M]. New York: American Elsevier, 1972.
    [2] ODA M. Method for evaluating the representative elementary volume based on a joint survey of rock masses[J]. Canadian Geotechnical Journal, 1988,25(3):440-447.
    [3] WANG M, KULATILAKE P H S. Estimation of REV size and three-dimensional hydraulic conductivity tensor for a fractured rockmass through a single well packer test and discrete fracture fluid flow modeling[J]. Int J Rock Mech Min Sci, 2002,39(7):887-904.
    [4] 卢 波,(葛修润),(朱东林),等. 节理岩体表征单元体的分形几何研究[J]. (岩石力学与工程学报), 2005,24(8):1355-1361. (LU Bo, GE Xiu-run, ZHU Dong-lin, et al. Fractal study on the representative elementary volume of jointed rock masses[J]. Chinese Journal of Rock Mechanics and Engineering,2005,24(8): 1355-1361. (in Chinese)
    [5] 周创兵),(陈益峰),(姜清辉). 岩体表征单元体与岩体力学参数[J]. (岩土工程学报), 2007,29(8):1135-1142. (ZHOU Chuang-bing, CHEN Yi-feng, JIANG Qing-hui.
    Representative elementary volume and mechanical parameters of fractured rock masses[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(8): 1135-1142.( (in Chinese))
    [6] 唐辉明),(张宜虎),(孙云志). 岩体等效变形参数研究[J]. 地球科学: 中国地质大学学报, 2007,32(3):389-396. (TANG Hui-ming, ZHANG Yi-hu, SUN Yun-zhi.
    A study of equivalent deformability parameters in rock masses[J]. Earth Science-Journal of China University of Geosciences, 2007, 32(3): 389-396.( (in Chinese))
    [7] 宁 宇,(徐卫亚),(郑文棠),等. 柱状节理岩体随机模拟及其表征单元体尺度研究[J]. (岩石力学与工程学报), 2008,27(6):1202-1208. (NING Yu, XU Wei-ya, ZHENG Wen-tang, et al. Study of random simulation of columnar jointed rock mass ans its representative elementary volume scale[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(6): 1202-1208. (in Chinese)
    [8] 夏 露,(刘晓非),(于青春). 基于块体化程度确定裂隙岩体表征单元体[J]. 岩 土 力 学, 2010,31(12):3991-3997. (XIA Lu, LIU Xiao-fei, YU Qing-chun.
    Determining representative elementary volume of fractured rock mass based on blockiness analysis[J]. Rock and Soil Mechanics, 2010, 31(12): 3991-3997.( (in Chinese))
    [9] 杨建平),(陈卫忠),(戴永浩). 裂隙岩体变形模量尺寸效应研究I: 有限元法[J]. (岩土力学), 2011,32(5):1538-1545. (YANG Jian-ping, CHEN Wei-zhong, DAI Yong-hao.
    Study of scale effect of deformation modulus of fractured rock mass—part I: Finite element method [J]. Rock and Soil Mechanics, 2011, 32(5): 1538-1545.( (in Chinese))
    [10] 张莉丽),张 辛,王 云,等. 非常低延展性裂隙岩体REV存在性研究[J]. (水文地质工程地质), 2011,38(5):20-25. (ZHANG Li-li, ZHANG Xin, WANG Yun, et al. Determining of the REV for fracture rock mass of very low ductility[J]. Hydrogeology and Engineering Geology,2011,38(5): 20-25. (in Chinese)
    [11] 马超锋),李 晓,(介玉新),等 围压对节理岩体表征单元体尺寸的影响研究[J]. 岩石力学与工程学报,2011, 30(增刊2): 3928-3936. (MA Chao-feng, LI Xiao, JIE Yu-xin.
    et al Effect of confining pressure on representative elementary volume size of jointed rock mass[J]. Chinese Journal of Rock Mechanics and Engineering,2011, 30(S2): 3928-3936. (in Chinese))
    [12] DI Sheng-jie, XU Wei-ya, NING Yu,et al. Macro- mechanical properties of columnar jointed basaltic rock masses[J]. Journal of Central South University of Technology, 2011,18(6):2143-2149.
    [13] WU Qiong,KULATILAKE P H S W. REV and its properties on fracture system and mechanical properties, and an orthotropic constitutive model for a jointed rock mass in a dam site in China[J]. Computers and Geotechnics, 2012,43(2012):124-142.
    [14] GRENON M, HADJIGEORGIOU J. Applications of fracture system models (FSM) in mining and civil rock engineering design[J]. International Journal of Mining Reclamation and Environment, 2012,26(1):55-73.
    [15] TANG C A. Numerical simulation of progressive rock failure and associated seismicity[J]. International Journal of Rock Mechanics and Mining Sciences. 1997, 34: 249-261.
    [16] ZHU W C, TANG C A. Micromechanical model for simulating the fracture process of rock[J]. Rock Mechanics and Rock Engineering, 2004,37(1):25-56.
    [17] 蒲成志),曹 平,(赵延林),等. 单轴压缩下多裂隙类岩石材料强度试验与数值分析[J]. (岩土力学), 2010,31(11):3661-3666. (PU Cheng-zhi, CAO Ping, ZHAO Yan-lin, et al. Numerical analysis and strength experiment of rock - like materials with multi - fissures under uniaxial compression [J]. Rock and Soil Mechanics,2010,31(11): 3661-3666. (in Chinese)
    [18] 李新平),(朱维申). 多裂隙岩体的损伤断裂模型及模型试验[J]. (岩土力学), 1991,12(2):5-14. (LI Xin-ping, ZHU Wei-shen.
    The damage fracture model for jointed rock mass and model tests[J]. Rock and Soil Mechanics, 1991, 12(2): 5-14.( (in Chinese))
    • 相关文章
    • 施引文献
    • 资源附件(0)
计量
  • 文章访问数: 
  • HTML全文浏览量:  0
  • PDF下载量: 
  • 被引次数: 0
出版历程
  • 收稿日期:  2012-08-26
  • 发布日期:  2013-06-19

目录

摘要
HTML全文
    参考文献(18)
    相关文章
    施引文献
    资源附件(0)

    /

    返回文章
    返回
    版权所有 © 2010水利部交通部国家能源局南京水利科学研究院 苏ICP备05007122号-11公安联网备案号：32010602011255
    编辑部地址：南京市虎踞关34号《岩土工程学报》编辑部邮编：210024电话：025-85829534，85829556E-mail: ge@nhri.cn