粉土中吸力式桶形基础沉贯及抗拔特性试验研究

朱斌; 孔德琼; 童建国; 孔令刚; 陈仁朋

粉土中吸力式桶形基础沉贯及抗拔特性试验研究 English Version

朱斌^1,2,
孔德琼^1,2,
童建国³,
孔令刚^1,2,
陈仁朋^1,2

(1.浙江大学软弱土与环境土工教育部重点试验室，浙江杭州310058 ; 2.浙江大学岩土工程研究所，浙江杭州310058 ; 3.浙江省电力设计院，浙江杭州310012)

基金项目: 国家自然科学基金项目(50979097); 国家“863”高技术研究发展计划资助项目(2007AA05Z427); 浙江省重点创新团队支持计划项目(2009R50050)

详细信息

作者简介:
朱斌(1977– )，男，湖南岳阳人，副教授，主要从事基础工程和海洋岩土工程等方面的教学和研究。

中图分类号: TU432
计量
- 文章访问数: 1253
- HTML全文浏览量: 2
- PDF下载量: 769
出版历程
- 收稿日期: 2010-05-04
- 发布日期: 2011-07-14

Model tests on penetration and pullout ofsuction caissons in silt

(1. MOE Key Laboratory of Soft Soils and Geoenvironmental Engineering , Zhejiang University,Hangzhou 310058, China;2.Institute of Geotechnical Engineering ,ZhejiangUniversity ,Hangzhou 310058, China;3. Zhejiang Electric Power Design Institute,Hangzhou 310012, China)

摘要

摘要: 吸力式桶形基础的负压沉贯控制和抗拔承载力确定是海洋钻井平台和海上风电机组多桶基础以及深海吸力锚基础设计和施工中的关键问题。通过室内大比例模型试验研究了吸力式桶形基础在饱和粉土中的负压沉贯及抗拔特性。负压沉贯试验结果表明负压并不能明显减小吸力式桶形基础在粉土中的沉贯阻力，基于CPT试验结果可较为准确地预估沉贯施工所需负压，从而确保沉贯的顺利实施和防止沉贯过程中地基发生管涌破坏。不同加载速率下的上拔试验结果表明存在一临界加载速率，当实际加载速率超过该临界值后，加载速率对吸力式桶形基础的抗拔特性影响较小。结合桶体及桶外土体的变形，提出了粉土地基中不同受力状况下吸力式桶形基础的抗拔承载力计算方法。
- 吸力式桶形基础 /
- 粉土 /
- 沉贯 /
- 抗拔 /
- 承载力
Abstract: Suction penetration and ultimate uplift capacity are the two keyissues in the design and construction of suction caissons used as suction anchorsin deep water or multi-caisson foundations for the offshore platforms/windturbines. A programme of large-scale model tests on a suction caisson iscarried out in a large soil tank in Zhejiang University to study the behaviors of the caisson foundations during suction penetration and pullout. The test results of suction penetration show that the suction under the lid just has aslight influence on installation resistance of the caissons in silt, and the suction required to penetrate the caisson without soil piping is well predicted based on the results of CPT tests. The pullout tests with different loading rates are also carried out, and the results indicate that loading rate has little effect on the performance of the caisson foundation if a critical loading rate is surpassed. Based on the test results, the ultimate pullout capacitiesof the caissons in silt for different loading conditions are presented.
- suction caisson /
- silt /
- penetration /
- pullout /
- bearing capacity

HTML全文

参考文献(28)

[1]	BYE A, ERBRICH C, EARL K. Geotechnical design of bucket foundation[C]// OTC7793, 1995: 869–883.
[2]	鲁晓兵, 郑哲敏, 张金来. 海洋平台吸力式基础的研究与进展[J]. 力学进展, 2003, 33(1): 27–40. (LU Xiao-bin, ZHENG Zhe-min, ZHANG Jin-lai. Research and development of suction caisson for ocean platform[J]. Mechanics Advances, 2003, 33(1): 27–40. (in Chinese))
[3]	施晓春, 徐日庆, 龚晓南, 等. 桶形基础发展概况[J]. 土木工程学报, 2000, 33(4): 68–73. (SHI Xiao-chun, XU Ri-qing, GONG Xiao-nan, et al. General conditions of suction bucket foundation[J]. China Civil Engineering Journal, 2000, 33(4): 68–73. (in Chinese)).
[4]	HOULSBY G T, BYRNE B W. Design procedures for installation of suction caisson in sand[J]. Geotechnical Engineering, 2005, 158(3): 135–144.
[5]	SENDERS M, RANDOLPH M F. CPT-Based method for the installation of suction caissons in sand[J]. Journal of Geotechnical and Geoenviromental Engineering, 2009, 1(14): 14–25.
[6]	FELD T. Suction buckets, a new innovative foundation concept, applied to offshore wind turbines[D]. Aalborg: Aalborg Univ, 2001.
[7]	范庆来. 滩海吸力式桶形基础承载力特性研究[D]. 大连:大连理工大学, 2007. (FAN Qing-lai. A study on bearing capacity behavior of suction bucket foundation in beach-shallow sea[D]. Daliang: Dalian Univ Technol, 2007. (in Chinese))
[8]	杨少丽, 李安龙, 齐剑峰. 桶基负压沉贯过程模型试验研究[J]. 岩土工程学报, 2003, 25(2): 236–238. (YANG Shao-li, LI An-long, QI Jian-feng. Experimental study on bucket foundation during penetration by suction[J]. Chinese Journal of Geotechnical Engineering, 2003, 25(2): 236–238. (in Chinese))
[9]	王庚荪, 孔令伟, 杨家岭, 等. 单桶负压下沉过程中土体与桶形基础的相互作用[J]. 岩土力学, 2003, 24(6): 877–881. (WANG Geng-sun, KONG Ling-wei, YANG Jia-ling, et al. Interaction between soil mass and bucket foundation in suction sinking process of single bucket[J]. Rock and Soil Mechanics, 2003, 24(6): 877–881. (in Chinese))
[10]	曹耀峰. 粉土地基下桶形基础沉贯试验研究及工程应用[J]. 黄渤海海洋, 2000, 18(4). (CHAO Yao-feng. Bucket foundation penetration test study and its application in the engineering[J]. Journal of Oceanography of Huanghai & Bohai Seas, 2000, 18(4). (in Chinese))
[11]	BYRNE B W, HOULSBY G T. Experimental investigations of the response of suction caissons to transient vertical loading[J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 2004, 128(11): 926–939.
[12]	HOULSBY G T, KELLY R B, HUXTABLE J, et al. Field trials of suction caissons in sand for off shore wind turbine foundations[J]. Géotechnique, 2006, 56(1): 3–10.
[13]	HOULSBY G T. Geotechnical model testing-sleipner vest project[D]. University of Oxford. 1995.
[14]	MANGAL J K, HOULSBY G T. Partially-drained loading of shallow foundations on sand. OTC 10991. 1999.
[15]	BYRNE B W. Investigations of suction caissons in dense sand [D]. Oxford: University of Oxford, 2000.
[16]	栾茂田, 范庆来, 杨庆. 非均质软土地基上吸力式沉箱抗拔承载力数值分析[J]. 岩土工程学报, 2007, 29(7): 1054–1059. (LUAN Mao-tian, FAN Qing-lai, YANG Qing. Numerical analysis of ultimate pull-out resistance of suction caissons in inhomogeneous soft foundation[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(7): 1054–1059. (in Chinese))
[17]	张金来, 鲁晓兵, 王淑云, 等. 桶形基础极限承载力特性研究[J]. 岩石力学与工程学报, 2005, 24(7): 1169–1172. (ZHANG Jin-lai, LU Xiao-bing, WANG Shu-yun, et al. The characteristic of the bearing capacity of bucket foundation[J]. Chinese Journal of Rock Mechanic and Engineering, 2005, 24(7): 1169–1172. (in Chinese))
[18]	王晖, 王乐芹, 周锡, 等. 软黏土中桶形基础的上限法极限分析模型及其计算[J]. 天津大学学报, 2006, 39(3): 273–279. (WANG Hui, WANG Le-qin, ZHOU Xi, et al. Limit analysis and calculation for bucket foundation embedded in soft clay based on the upper-bound theorem[J]. Journal of Tianjin University, 2006, 39(3): 273–279. (in Chinese))
[19]	矫滨田, 鲁晓兵, 赵京, 等. 吸力式桶形基础抗拔承载力特性试验研究[J]. 中国海洋平台, 2006, 21(3). (JIAO Bin-tian, LU Xiao-bing, ZHAO Jing, et al. Test research of uplift capacity of caisson foundation[J]. China Offshore Platform, 2006, 21(3). (in Chinese))
[20]	LEBLANC C. Design of offshore wind turbine support structures[D]. Denmark: Technical University of Denmark, 2004.
[21]	JIA G W, ZHAN L T, CHEN Y M, et al. Performance of a large-scale slope model subjected to rising and lowering water levels[J]. Engineering Geology, 2009, 106(12): 92–103.
[22]	朱斌, 朱瑞燕, 罗军, 等. 海洋高桩基础水平大变位性状模型试验研究[J]. 岩土工程学报, 2010, 32(4). (ZHU Bin, ZHU Rui-yan, LUO Jun, et al. Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(4) .(in Chinese)).
[23]	HOULSBY G T, BYRNE B W. Design procedures for installation of suction caisson in clay and other materials[J]. Geotechnical Engineering, 2005, 158(2): 75–82.
[24]	DNV. Foundations, classification notes[R]. Hovik: Det Norske Veritas, 1992, 30(4).
[25]	LEHANE B A, SCHNEIDER J A, XU X. The UWA-05 method for prediction of axial capacity of driven piles in sand. Frontiers in offshore geotechnics: ISFOG 2005[R]. London:Taylor and Francis Group, 2005.
[26]	FINNNIE I M S. Performance of shallow foundations in calcareous soils[D]. Perth: University of Western Australia, 1993.
[27]	BYRNE B W, HOULSBY G T. Experimental investigations of the response of suction caissons to transient combined loading[J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 2004, 130(3): 240–253.
[28]	KELLY R B, HOULSBY G T, BYRNE B W. A comparison of field and laboratory tests of caisson foundations in sand and clay[J]. Geotechnique, 2006, 56(9): 617–626