桥梁吸力式沉箱基础承载特性试验研究

张永涛; 杨炎华; 黎冰; 龚维明

doi:10.11779/CJGE201501022

桥梁吸力式沉箱基础承载特性试验研究 English Version

1. 中交第二航务工程局有限公司技术中心,湖北武汉 430040; 2. 东南大学土木工程学院,江苏南京 210096

基金项目: 国家重点基础研究发展计划项目（2012CB719804）; 国家自然科学基金项目（51278172,51478167）; 江苏省自然科学基金项目; （BK2012883）

详细信息

作者简介:
张永涛（1978- ）,男,宁夏吴忠人,硕士,高级工程师,主要从事深水基础理论与施工技术研究。E-mail: kiptom@vip.163.com。

中图分类号: TU470
计量
- 文章访问数: 360
- HTML全文浏览量: 2
- PDF下载量: 550
出版历程
- 收稿日期: 2014-05-04
- 发布日期: 2015-01-19

Model tests on bearing performance of suction caisson foundation for bridges

1. Technology Center, CCCC Second Harbor Engineering Company Ltd., Wuhan 430040, China; 2. College of Civil Engineering, Southeast University, Nanjing 210096, China

摘要

摘要: 吸力式沉箱基础是跨海桥梁基础的一个新选择。基于桥梁基础的受荷特点,考虑不同的荷载作用方式,通过一系列模型试验研究了砂土中吸力式沉箱基础的承载特性。试验结果表明：沉箱的长度越长,吸力式沉箱基础的竖向承载力越大,侧壁摩阻力的贡献越大,而沉箱端部阻力可忽略不计;沉箱的长度越长,吸力式沉箱基础的水平承载力也越高,但相对于竖向承载力而言,基础的水平承载力很小,一般不超过其竖向承载力的5%。预加一定的竖向荷载,可显著提高吸力式沉箱基础的水平承载力,且预加的竖向荷载越大,基础的水平承载力越高,由于桥梁工程中基础承受的竖向荷载很大,所以有必要考虑这一因素对基础水平承载力的提高。
- 吸力式沉箱基础 /
- 桥梁 /
- 承载力 /
- 砂土 /
- 模型试验
Abstract: The suction caisson foundation is an alternative foundation for cross-sea bridges. Based on the loading characteristics of the foundation of cross-sea bridges, a series of model tests are carried out to investigate the bearing performance of the suction caisson foundation. Different loading directions are considered in the model tests. The test results show that the vertical bearing capacity of the suction caisson foundation and the contribution of sidewall friction resistance increase with the increasing length of suction, and the tip resistance of caisson can be neglected. The lateral bearing capacity of the suction caisson foundation also increases with the increasing length of suction, but it is small and no more than 5 percent of the vertical bearing capacity. The lateral bearing capacity of the suction caisson foundation can be improved significantly by pre-applied vertical loading, and the bigger the pre-applied vertical loading, the greater the lateral bearing capacity. The factor should be considered in dealing with the large vertical loading in bridge engineering.
- suction caisson foundation /
- bridge /
- bearing capacity /
- sand /
- model test

HTML全文

参考文献(20)

[1]	RAO S N, LATHA K H, PALLAVI B, et al. Studies on pullout capacity of anchors in marine clays for mooring systems[J]. Applied Ocean Research, 2006, 28(2): 103-111.
[2]	GAO Yu-feng, QIU Yue, LI Bing, et al. Experimental studies on the anti-uplift behavior of the suction caissons in sand[J]. Applied Ocean Research, 2013, 43: 37-45.
[3]	BANG S, JONES K D, KIM K O, et al. Inclined loading capacity of suction piles in sand[J]. Ocean Engineering, 2011, 38(7): 915-924.
[4]	JONESA K D, BANG S, CHO Y. Pullout capacity of embedded suction anchors in sand[J]. Ocean Engineering, 2007, 34(16): 2107-2114.
[5]	MONAJEMI H, RAZAK H A. Finite element modeling of suction anchors under combined loading[J]. Marine Structures, 2009, 22(4): 660-669.
[6]	KUMAR N D, RAO S N. Earth pressures on caissons in marine clay under lateral loads - a laboratory study[J]. Applied Ocean Research, 2010, 32(1): 58-70.
[7]	黎冰, 郑翔, 高玉峰, 等. 砂土中吸力式沉箱基础抗拔承载特性试验研究[J]. 岩土工程学报, 2013, 35(5): 902-907. (LI Bing, ZHENG Xiang, GAO Yu-feng, et al. Model tests on pull-out capacity of suction caisson foundation in sand [J]. Chinese Journal of Geotechnical Engineering, 2013, 35(5): 902-907. (in Chinese))
[8]	BYRNE B W, HOULSBY G T. Foundations for offshore wind turbines[J]. The Philosophical Transactions of the Royal Society, 2003, 361(1813): 2909-2930.
[9]	BYRNE B W, HOULSBY G T. Experimental investigations of the response of suction caissons to transient vertical loading[J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 2002, 128(11): 926-939.
[10]	HOULSBY G T, KELLY R B, HUXTABLE J, et al. Field trials of suction caissons in clay for offshore wind turbine foundations[J]. Géotechnique, 2005, 55(4): 287-296.
[11]	HOULSBY G T, KELLY R B, HUXTABLE J, et al. Field trials of suction caissons in sand for offshore wind turbine foundations[J]. Géotechnique, 2006, 56(1): 3-10.
[12]	ZHU B, KONG D Q, CHEN R P, et al. Installation and lateral loading tests of suction caissons in silt[J]. Canadian Geotechnical Journal, 2011, 48(7): 1070-1084.
[13]	朱斌, 应盼盼, 郭俊科, 等. 海上风电机组吸力式桶形基础承载力分析与设计[J]. 岩土工程学报, 2013, 35(增刊1): 443-450. (ZHU Bin, YING Pan-pan, GUO Jun-ke, et al. Analysis and design of bearing capacity of suction caisson foundations of offshore wind turbines[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(S1): 443-450. (in Chinese))
[14]	李大勇, 冯凌云, 张宇坤, 等. 饱和细砂中进行裙式吸力式基础水平单调加载模型试验——承载力及变形分析[J]. 岩土工程学报, 2013, 35(11): 2030-2037. (LI Da-yong, FENG Ling-yun, ZHANG Yu-kun, et al. Model tests of skirted suction caissons in saturated fine sand under horizontal monotonic loading: lateral bearing capacity and deformations[J]. Chinese Journal of Geotechnical Engineering, 2013, 35(11): 2030-2037. (in Chinese))
[15]	鲁晓兵, 矫滨田, 刘亮. 饱和砂土中桶形基础承载力的实验研究[J]. 岩土工程技术, 2006, 26(4): 170-172. (LU Xiao-bing, JIAO Bin-tian, LIU Liang. Experimental study on the bearing capacity of bucket foundation in saturated sand[J]. Geotechnical Engineering Technique, 2006, 26(4): 170-172. (in Chinese))
[16]	张建红, 林小静, 鲁晓兵. 水平荷载作用下张力腿平台吸力式基础的物理模拟[J]. 岩土工程学报, 2007, 29(1): 77-81. (ZHANG Jian-hong, LIN Xiao-jing, LU Xiao-bing. Physical modeling of suction foundations of TLPs under horizontal loads[J]. Chinese Journal of Geotechnical Engineering, 2007, 29(1): 77-81. (in Chinese))
[17]	鲁晓兵, 王义华, 张建红, 等. 水平动载下桶形基础变形的离心机实验研究[J]. 岩土工程学报, 2005, 27(7): 789-791. (LU Xiao-bing, WANG Yi-hua, ZHANG Jian-hong, et al. Centrifuge test on the deformation of bucket foundation under horizontal vibration load[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(7): 789-791. (in Chinese))
[18]	RANDOLPH M F, HOUSE A R. Analysis of suction caisson capacity in clay[C]// Proceedings of 34th Offshore Technology Conference. Houston, 2002: 151-162.
[19]	张金来, 鲁晓兵, 王淑云, 等. 桶形基础极限承载力特性研究[J]. 岩石力学与工程学报, 2005, 24(7): 1169-1172. (ZHANG Jin-lai, LU Xiao-bing, WANG Shu-yun, et al. The Characteristics of the bearing capacity of bucket foundation[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(7): 1169-1172. (in Chinese))
[20]	武科, 栾茂田, 范庆来, 等. 滩海桶形基础破坏机制及极限承载力分析研究[J]. 岩土工程学报, 2008, 30(3): 394-398. (WU Ke, LUAN Mao-tian, FAN Qing-lai, et al. Failure mechanism and ultimate bearing capacity of bucket foundation in shallow water[J]. Chinese Journal of Geotechnical Engineering, 2008, 30(3): 394-398. (in Chinese))