矿山尺度下微震定位精度及稳定性控制初探

谢兴楠; 叶根喜; 柳建新

doi:10.11779/CJGE201405013

矿山尺度下微震定位精度及稳定性控制初探 English Version

1. 中南大学地球科学与信息物理学院,湖南长沙 410083; 2. 金属矿山高效开采与安全教育部重点实验室（北京科技大学）,北京100083

基金项目: 国家自然科学基金项目（41174103）; 国家留学基金项目（2008）

详细信息

作者简介:
谢兴楠(1965- ),男,教授级高级工程师,主要从事地质与岩土工程信息技术的科研与管理工作。E-mail：54935713@qq.com。

中图分类号: TU457
计量
- 文章访问数: 376
- HTML全文浏览量: 3
- PDF下载量: 346
出版历程
- 收稿日期: 2013-09-09
- 发布日期: 2014-05-20

On control of accuracy and stability of microseismic location in a mining scale

1. School of geosciences and Info-physics of Central South University, Changsha 410083, China; 2. MOE Key Laboratory of High-Efficient Mining and Safety of Metal Mines, University of Science and Technology Beijing, Beijing 100083, China

摘要

摘要: 对微震定位精度和稳定性控制一直是矿山微震监测工程的一个难题。通过对微震监测系统误差的深入剖析,提出了“统一定位误差”的概念,将微震定位的误差条件进行了前置性统一；结合非线性定位的特点,对微震定位参数进行了非线性变换,提出了降维定位的基本思路及实现方法,解释了平面截割定位的几何原理,揭示了微震定位（平面截割法）的基本实质,并研究了内、外场定位的定位稳定性及控制方法。研究表明,“统一定位误差”是实现对微震定位精度控制的前置杠杆及控制尺度,指出微震定位结果的精度从属于几何定位,单一数值解（迭代极小值或最优化极小值）不具备绝对工程意义。理论分析及试验结果证实,平面截割定位是控制内、外近场定位尺度条件下的控制定位稳定性的有效途径。
- 微震 /
- 定位 /
- 定位精度 /
- 稳定性 /
- 误差
Abstract: For the microseismic monitoring in a mining scale, the control of accuracy and stability of location is always a difficult problem. Based on the thorough analysis of the error of monitoring system caused by propagation velocity, coordinates of sensors and picking time, the term of integrity-error of location which can be taken as the fundamental principles to appraise studies on the monitoring engineering is proposed. Nonlinear analysis and transformation are conducted to realize the dimension reduction, the called plane-cutting location method is given and the basic nature of location is also clearly demonstrated. It is concluded that the integrity-error is the scale parameter and precondition in determining the location error. The accuracy and stability of location basically rely on the analytic geometry rather than numerical solution. The theoretical analyses and experiments both show that the plane-cutting location is a reasonable way of keeping the accuracy and stability of location in a acceptable level in a mining scale.
- microseism /
- location /
- location accuracy /
- location stability /
- error

HTML全文

参考文献(14)

[1]	陆菜平, 窦林名, 吴兴荣, 等. 岩体微震监测的频谱分析与信号识别[J]. 岩土工程学报, 2005, 27(7): 772-775. (LU Cai-ping, DOU Lin-ming, WU Xing-rong, et al. Frequency spectrum analysis of microseismic monitoring and signal differentiation of rock material[J]. Chinese Journal of Geotechnical Engineering, 2005, 27(7): 772-775. (in Chinese))
[2]	赵兴东, 唐春安, 李元辉, 等. 基于微震监测及应力场分析的冲击地压预测方法[J]. 岩石力学与工程学报, 2005, 24(增刊1): 4745-4749. (ZHAO Xing-dong, TANG Chun-an, LI Yuan-hui, et al. Prediction method of rock burst based on microseismic monitoring and stress field analysis[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(S1): 4745-4749. (in Chinese))
[3]	汪华君, 姜福兴, 成云海, 等. 覆岩导水裂隙带高度的微地震(MS)监测研究[J]. 煤炭工程, 2006(3): 74-76. (WANG Hua-jun, JIANG Fu-xing, CHENG Yun-hai, et al. Research on microseismic monitoring at top level of water conducted cracking zone in overburden rock[J]. Coal Engineering, 2006(3): 74-76. (in Chinese))
[4]	姜福兴, 叶根喜, 王存文, 等. 高精度微震监测技术在煤矿突水监测中的应用[J]. 岩石力学与工程学报, 2008, 27(9): 1932-1938. (JIANG Fu-xing, YE Gen-xi, WANG Cun-wen, et al. Application of high-precision microseismic monitoring technique to water inrush monitoring in coal mine[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(9): 1932-1938. (in Chinese))
[5]	姜福兴, XUN Luo, 杨淑华. 采场覆岩空间破裂与采动应力场的微震探测研究[J]. 岩土工程学报, 2003, 25(1): 23-25. (JIANG Fu-xing, XUN Luo, YANG Shu-hua. Study on microseismic monitoring for spatial structure of overlying strata and mining pressure field in longwall face[J]. Chinese Journal of Geotechnical Engineering, 2003, 25(1): 23-25. (in Chinese))
[6]	林峰, 李庶林, 薛云亮, 等. 基于不同初值的微震源定位方法[J]. 岩石力学与工程学报, 2010, 29(5): 996-1002. (LIN Feng, LI Shu-lin, XUE Yun-liang, et al. Microseismic sources location method basced on different initial values[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(5): 996-1002. (in Chinese))
[7]	潘一山, 赵扬锋, 官福海, 等. 矿震监测定位系统的研究及应用[J]. 岩石力学与工程学报, 2007, 26(5): 1002-1011. (PAN Yi-shan, ZHAO Yang-feng, GUAN Fu-hai, et al. Study on rockburst monitoring and orientation system and its application[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(5): 1002-1011. (in Chinese))
[8]	张银平. 岩体声发射与微震监测定位技术及其应用[J]. 工程爆破, 2002, 8(1): 58-61. (ZHANG Yin-ping. Rock mass acoustic emission and micro-seismic monitoring and localizing technology and their applications[J]. Engineering Blasting, 2002, 8(1): 58-61. (in Chinese))
[9]	BARTON N. Rock quality, seismic velocity, attenuation and anisotropy[M]. London and Netherlands: Taylor and Francis, 2006.
[10]	DVORKIN J, BREVIK I. Diagnosing high-porosity sandstones: Strength and permeability from porosity and velocity[J]. Geophysics, 1999, 64(3): 795-799.
[11]	GE M. Optimization of Transducer array geometry for acoustic emission/microseismic source location[D]. Pennsylvania: Department of Mineral Engineering, The Pennsylvania State University, 1988, 237.
[12]	叶根喜, 姜福兴, 郭延华, 等. 煤矿深部采场爆破地震波传播规律的微震原位试验研究[J]. 岩石力学与工程学报, 2008, 27(5): 1053-1058. (YE Gen-xi, JIANG Fu-xing, GUO Yan-hua, et al. Experimental research on seismic wave attenuation by field micro-seismic monitoring in a deep coal mine[J]. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(5): 1053-1058. (in Chinese))
[13]	杨淑华, 张兴民, 姜福兴, 等. 微地震定位监测的深孔检波器及其安装技术[J]. 北京科技大学学报, 2006, 28(1): 68-70, 100. (YANG Shu-hua, ZHANG Xing-min, JIANG Fu-xing, et al. Deep hole geophones and installing techniques used in microseismic monitoring[J]. Journal of University of Science and Technology Beijing, 2006, 28(1): 68-70, 100. (in Chinese))
[14]	施龙青, 韩进. 底板突水机制及预测预报[M]. 北京: 中国矿业大学出版社, 2004. (SHI Long-qing, HAN Jin. Floor water-inrush mechanism and prediction[M]. Beijing: China University of Mining and Technology Press, 2004. (in Chinese))